1D montage- en hijssystemen

Terwa levert een breed programma aan schroef- en hijshulzen voor alle verschillende toepassingen. De schroefhulzen zijn voorzien van schroefdraad en worden ingestort in de prefab elementen om naderhand in de afbouw delen te kunnen monteren, zoals trapleuningen, balkonhekken, etc.

Een betonelement kan veilig getransporteerd worden in combinatie met de Terwa hijshaak of de Terwa inschroeflussen ( THL ).

De hijshulzen zijn voorzien van M of Rd draad. Alle schroef- en hijshulzen zijn elektrolytisch verzinkt leverbaar, de meeste zijn ook leverbaar in RVS 304 en sommige zijn leverbaar in RVS 316.

Verder bestaat het 1D programma uit speciale transportankers met schroefdraad zoals de TGK, de TGL en de HBS. De TGK en TGL zijn opgebouwd uit een gegolfd stuk betonstaal met een opgeperste bus met schroefdraad. De HBS, ook bekend als segmentanker, is opgebouwd uit de voet van een T slot anker met een opgeperste bus met schroefdraad.

	Type	Type	Thread	Overall	Diam.	Diam.	Load Kg	Weight
	BSR	BSR- SS		length	D	d	axial ( 1 )	tail
	zinc plated	stainless steel	M	mm	mm	mm	0o	FeB 500
Schroefhuls BSR, plat uiteinde + gat
	BSR- 0850	BSR- 0850-SS	M 8	50	10.5	6	-	-
	BSR- 1050	BSR- 1050-SS	M 10	50	13.5	10	-	-
	BSR- 1260	BSR- 1260-SS	M 12	60	16	12	1000	8 x U x300
	BSR- 1680	BSR- 1680-SS	M 16	80	22	12	1600	10 x U x350
	BSR- 16100	BSR- 16100-SS	M 16	100	22	12	1600	10 x U x350
	BSR- 16120	BSR- 16120-SS	M 16	120	22	12	1600	10 x U x350
	BSR- 20100	BSR- 20100-SS	M 20	100	27	14	2500	12 x U x400
	BSR- 20120	BSR- 20120-SS	M 20	120	27	14	2500	12 x U x400
	BSR- 24120	BSR- 24120-SS	M 24	120	34	15	2500	12 x U x400
	( 1 ) working load only valid if the reinforcing tail is used! This tail is NO part of the product BSR.
	( 2 ) The capacity loads are with a breakage factor of safety equal to 4.

	Type	Type	Thread	Overall	Diam.	Diam.	Load Kg	Weight
	BSRS	BSRS- SS		length	D	i	l	axial (1)
	zinc plated	stainless steel	M	mm	mm	mm	mm	0o
Schroefhuls BSRS, plat uiteinde
	BSRS- 0850	BSRS- 0850-SS	M 8	50	10.5	6		250
	BSRS- 1050	BSRS- 1050-SS	M 10	50	13.5	10		350
	BSRS- 1260	BSRS- 1260-SS	M 12	60	16	12		500
	BSRS- 1680	BSRS- 1680-SS	M 16	80	22	12	80	850
	BSRS- 16100	BSRS- 16100-SS	M 16	100	22	12	80	1000
	BSRS- 16120	BSRS- 16120-SS	M 16	120	22	12	80	1200
	BSRS- 20100	BSRS- 20100-SS	M 20	100	27	14		1300
	BSRS- 20120	BSRS- 20120-SS	M 20	120	27	14		1400
	BSRS- 24120	BSRS- 20120-SS	M 20	120	34	15		1800
	( 1 ) The capacity loads are with a breakage factor of safety equal to 4.

	Type	Type	Thread	Overall	Diam.	Load Kg	Weight
	BSH	BSH-SS		length	D	axial
	zinc plated	stainless steel	M	L mm	mm	0o	30o
Schroefhuls BSH, met gebogen eind
	BSH- 0830	BSH- 0830-SS	M 8	30 x 20	11	300	-
	BSH- 0850	BSH- 0850-SS	M 8	50 x 20	11	300	-
	BSH- 1035	BSH- 1035-SS	M 10	65 x 25	13	600	-
	BSH- 1060	BSH- 1060-SS	M 10	60 x 25	13	600	-
	BSH- 1245	BSH- 1245-SS	M 12	45 x 25	17	400	-
	BSH- 1270	BSH- 1270-SS	M 12	70 x 30	17	800	-
	BSH- 1660	BSH- 1660-SS	M 16	60 x 30	22	800	-
	BSH- 16100	BSH- 16100-SS	M 16	100 x 35	22	1300	-
	BSH- 2070	BSH- 2070-SS	M 20	70 x 30	27	1200	-
	BSH- 20100	BSH- 20100-SS	M 20	100 x 35	27	1600	-
	BSH- 2480	BSH- 2480-SS	M 24	80 x 35	33	1600	-

	Type	Type	Thread	Overall	Diam.	Diam.	Load Kg	Weight
	BSRF	BSRF- SS		length	b	g	axial ( 1 )	tail
	zinc plated	stainless steel	M	mm	mm	mm	0o	FeB 500
Schroefhuls BSRF met plat uiteinde + gat, flensplaat
	BSRF- 1050	BSRF- 1050-SS	M 10	50	13.5	10	-	-
	BSRF- 1260	BSRF- 1260-SS	M 12	60	16	12	1000	8 x U x300
	BSRF- 1680	BSRF- 1680-SS	M 16	80	22	12	1600	10 x U x350
	BSRF- 16100	BSRF- 16100-SS	M 16	100	22	12	1600	10 x U x350
	BSRF- 20100	BSRF- 20100-SS	M 20	100	27	14	2500	12 x U x400
	BSRF- 24120	BSRF- 24120-SS	M 24	120	34	15	2500	12 x U x400
	( 1 ) working load only valid if the reinforcing tail is used! This tail is NO part of the product BSRF.
	( 2 ) The capacity loads are with a breakage factor of safety equal to 4.

	Type	Type	Thread	Overall	Diam.	Diam.	Load Kg	Weight
	BSRFS	BSRFS- SS		length	D	i	l	axial (1)
	zinc plated	stainless steel	M	mm	mm	mm	mm	0o
Schroefhuls BSRFS met plat uiteinde + gat, flensplaat
	BSRFS- 1050	BSRFS- 1050-SS	M 10	50	13.5	10		350
	BSRFS- 1270	BSRFS- 1270-SS	M 12	70	16	12		500
	BSRFS- 1680	BSRFS- 1680-SS	M 16	80	22	12	80	850
	BSRFS- 16100	BSRFS- 16100-SS	M 16	100	22	12	80	1000
	BSRFS- 20100	BSRFS- 20100-SS	M 20	100	27	14		1300
	BSRFS- 24120	BSRFS- 24120-SS	M 24	120	34	15		1800
	( 1 ) The capacity loads are with a breakage factor of safety equal to 4.

	Type	Type	Thread	Overall	Diam.	Diam.	Load Kg	Weight
	HBU	HBU- SS		length	b	g	axial
	zinc plated	stainless steel	M	L mm	mm	mm	0o	Kg / 100
Schroefhuls HBU
	HBU-1050	HBU-1050-SS	M 10	50	13	6.2	350	3.67
	HBU-1060	HBU-1060-SS	M 10	60	13	6.2	400	4.4
	HBU-1260	HBU-1260-SS	M 12	60	16	9.2	600	6.27
	HBU-1270	HBU-1270-SS	M 12	70	16	9.2	700	7.3
	HBU-1685	HBU-1685-SS	M 16	85	21	10.2	900	15.4
	HBU-16100	HBU-16100-SS	M 16	100	21	10.2	1300	18.1
	HBU-20100	HBU-20100-SS	M 20	100	26	12.2	1400	30
	HBU-20130	HBU-20130-SS	M 20	130	26	12.2	1800	39.1
	HBU-24120	HBU-24120-SS	M 24	120	32	15.2	1800	55.2
	HBU-24150	HBU-24150-SS	M 24	150	32	15.2	2300	68.9
	( 1 ) working load only valid if the reinforcing tail is used! This tail is NO part of the product BSR.
	( 2 ) The capacity loads are with a breakage factor of safety equal to 4.

	Type	Type	Thread	Overall	Diam.	Diam.	cross pin	Load Kg	Weight
	HBUS	HBUS- SS		length	b	g	i	j	axial
	zinc plated	stainless steel	M	L mm	mm	mm	mm	mm	0o
Schroefhuls HBUS
	HBUS-1050	HBUS-1050-SS	M 10	50	13	6.2	6	50	350
	HBUS-1060	HBUS-1060-SS	M 10	60	13	6.2	6	50	400
	HBUS-1260	HBUS-1260-SS	M 12	60	16	9.2	9	50	600
	HBUS-1270	HBUS-1270-SS	M 12	70	16	9.2	9	50	700
	HBUS-1685	HBUS-1685-SS	M 16	85	21	10.2	10	80	900
	HBUS-16100	HBUS-16100-SS	M 16	100	21	10.2	10	80	1300
	HBUS-20100	HBUS-20100-SS	M 20	100	26	12.2	12	80	1400
	HBUS-20130	HBUS-20130-SS	M 20	130	26	12.2	12	80	1800
	HBUS-24120	HBUS-24120-SS	M 24	120	32	15.2	15	100	1800
	HBUS-24150	HBUS-24150-SS	M 24	150	32	15.2	15	100	2300
	( 1 ) working load only valid if the reinforcing tail is used! This tail is NO part of the product BSR.
	( 2 ) The capacity loads are with a breakage factor of safety equal to 4.

	Type	Type	Type	Thread	Overall	Diam.	Weight
	KB	KB- SS2	KB- SS4		length	b
	Steel, zinc plated	stainless steel 304	stainless steel 316 Ti	M	L mm	mm	Kg / 100
Schrufhuls KB
	KB- 0615	KB- 0615-SS2	KB- 0615-SS4	M 6	15	10	0.7
	KB- 0825	KB- 0825-SS2	KB- 0825-SS4	M 8	25	12	1.2
	KB- 1025	KB- 1025-SS2	KB- 1025-SS4	M 10	25	13	1.3
	KB- 1030	KB- 1030-SS2	KB- 1030-SS4	M 10	30	13	1.3
	KB- 1236	KB- 1236-SS2	KB- 1236-SS4	M 12	36	15.5	2.6
	KB- 1648	KB- 1648-SS2	KB- 1648-SS4	M 16	48	21	6.1
	KB- 2060	KB- 2060-SS2	KB- 2060-SS4	M 20	60	26	11.1
	KB- 2472	KB- 2472-SS2	KB- 2472-SS4	M 24	72	32	23.4
	KB- 3090	KB- 3090-SS2	KB- 3090-SS4	M 30	90	40	45.5
	KB- 36108	KB- 36108-SS2	KB- 36108-SS4	M 36	108	47.5	75
	KB- 42110	KB- 42110-SS2	KB- 42110-SS4	M 42	110	54	120
	KB- 42126	KB- 42126-SS2	KB- 42126-SS4	M 42	126	54	120

	Type	Type	Thread	Overall	Diam.	Weight
	KBL	KBL- SS4		length	b
	Steel, zinc plated	stainless steel 316 Ti	M	L mm	mm	Kg / 100
Schroefhuls KBL
	KBL- 1245	KBL- 1245-SS4	M 12	36	15.5	2.6
	KBL- 1660	KBL- 1660-SS4	M 16	63	21	8.1
	KBL- 2075	KBL- 2075-SS4	M 20	60	26	15
	KBL- 2490	KBL- 2490-SS4	M 24	72	32	29.5
	KBL- 3090	KBL- 3090-SS4	M 30	90	40	45.5

	Type	Type	Type	Thread	Overall	FIXING Lood Kg	LIFTING Load Kg	Weight
	HBB-EV	HBB-TV	HBB-SS4		length	a	b	B25
	connector, zinc plated	connector, hot dipped galv.	connector, stainless steel	M	L mm	mm	mm	design load
Boutanker HBB
	HBB-M12-100-EV	HBB-M12-100-TV	HBB-M12-100-SS4	12	100	23	15.5	1800
	HBB-M12-150-EV	HBB-M12-150-TV	HBB-M12-150-SS4	12	150	23	15.5	1800
	HBB-M16-140-EV	HBB-M16-140-TV	HBB-M16-140-SS4	16	140	29	21	2700
	HBB-M16-220-EV	HBB-M16-220-TV	HBB-M16-220-SS4	16	220	29	21	2700
	HBB-M20-150-EV	HBB-M20-150-TV	HBB-M20-150-SS4	20	150	35	26	3700
	HBB-M20-180-EV	HBB-M20-180-TV	HBB-M20-180-SS4	20	180	35	26	4200
	HBB-M20-270-EV	HBB-M20-270-TV	HBB-M20-270-SS4	20	270	35	26	4200
	HBB-M24-200-EV	HBB-M24-200-TV	HBB-M24-200-SS4	24	200	46	32	5800
	HBB-M24-320-EV	HBB-M24-320-TV	HBB-M24-320-SS4	24	320	46	32	6000
	HBB-M30-240-EV	HBB-M30-240-TV	HBB-M30-240-SS4	30	240	60	40	7600
	HBB-M30-380-EV	HBB-M30-380-TV	HBB-M30-380-SS4	30	380	60	40	10200
	HBB-M36-300-EV	HBB-M36-300-TV	HBB-M36-300-SS4	36	300	74	47.5	10600
	HBB-M36-420-EV	HBB-M36-420-TV	HBB-M36-420-SS4	36	420	74	47.5	14500
	HBB-M42-300-EV	HBB-M42-300-TV	HBB-M42-300-SS4	42	300	68	54	10500
	HBB-M42-460-EV	HBB-M42-460-TV	HBB-M42-460-SS4	42	460	68	54	20500
	The capacity loads are with a breakage factor of safety equal to 4 - 5.

	Type	Type	Type	Thread	Overall	Admissible	Weight
	HBP-EV	HBP-TV	HBP-SS4		length	a	b
	Connector, zinc plated	connector, hot dipped galv.	Connector, stainless steel	M	L mm	mm	mm
Boutanker met voetplaat HBP
	HBP-M12-55-EV	HBP-M12-55-TV	HBP-M12-55-SS4	12	55	23	15.5
	HBP-M16-75-EV	HBP-M16-75-TV	HBP-M16-75-SS4	16	75	29	21
	HBP-M20-90-EV	HBP-M20-90-TV	HBP-M20-90-SS4	20	90	35	26
	HBP-M24-110-EV	HBP-M24-110-TV	HBP-M24-110-SS4	24	110	46	32
	HBP-M30-140-EV	HBP-M30-140-TV	HBP-M30-140-SS4	30	140	60	40
	The capacity loads are with a breakage factor of safety equal to 4 - 5.

	Type	Thread	Type	Thread	Load	Overall	Diam.	Load Kg ( 1 )	Weight
	HSR-M		HSR-Rd		Rate	length	b	a	h
		M		Rd	t	L mm	mm	mm	mm
Hijshuls HSR
	HSR- M1260	M 12	HSR- Rd1260	Rd 12	0.5	60	16.5	20	13
	HSR- M1680	M 16	HSR- Rd1680	Rd 16	1.2	80	22	22	21
	HSR- M2095	M 20	HSR- Rd2095	Rd 20	2	95	28	25	24
	HSR- M24100	M 24	HSR- Rd24100	Rd 24	2.5	100	31	30	24
	HSR- M30135	M 30	HSR- Rd30135	Rd 30	4	135	41	35	36
	( * ) by using the lifting loop type THS or the lifting swivel THH and with use of reinforcing tail and reinforcing steel
	The admissible load is only valid if the mentioned reinforcing tail ( Feb 500 ) is used.

	Type	Thread	Type	Thread	Load	Overall	Diam.	Load Kg	Weight
	HSB-M		HSB-Rd		Rate	length	b	a	h
		M		Rd	t	L mm	mm	mm	mm
Hijshuls HSB
	HSB- M12	12	HSB- Rd12	12	0.5	40	16.5	18	12
	HSB- M16	16	HSB- Rd16	16	1.2	58	22	24	15
	HSB- M20	20	HSB- Rd20	20	2	69	28	32	22
	HSB- M24	24	HSB- Rd24	24	2.5	78	31	36	23
	HSB- M30	30	HSB- Rd30	30	4	101	41	45	28
	HSB- M36	36	HSB- Rd36	36	6.3	125	47	54
	HSB- M42	42	HSB- Rd42	42	8	145	54	63
	HSB- M52	52	HSB- Rd52	52	12.5	195	67	78
	( * ) by using the lifting loop type THS or the lifting swivel THH and with use of reinforcing tail and reinforcing steel
	The admissible load is only valid if the mentioned reinforcing tail ( Feb 500 ) is used.

	Type	Thread	Type	Thread	Load	Overall	Diam.	Load Kg	Weight
	HSB-SS-M		HSB-SS-Rd		Rate	length	D	a	g
		M		Rd	t	L mm	mm	mm	mm
Hijshuls HSB roestvrij staal
	HSB-M12-SS	12	HSB-Rd12-SS	12	0.5	48	16.5	18	8
	HSB-M16-SS	16	HSB-Rd16-SS	16	1.2	56	22	24	13
	HSB-M20-SS	20	HSB-Rd20-SS	20	2	68	28	32	15
	HSB-M24-SS	24	HSB-Rd24-SS	24	2.5	77	31	36	18
	HSB-M30-SS	30	HSB-Rd30-SS	30	4	96	41	45	22
	HSB-M52-SS	30	HSB-Rd52-SS	30	12.5	195	70		78
	( * ) by using the lifting loop type THS or the lifting swivel THH and with use of reinforcing tail and reinforcing steel
	The admissible load is only valid if the mentioned reinforcing tail ( Feb 500 ) is used.

	Type	Thread	Type	Thread	Overall	Load	Weight
	HSP-M		HSP-Rd		length	D	e
		M		Rd	h mm	mm	mm
Hijshuls met voetplaat HSP
	HSP-M12	12	HSP-Rd12	12	30	16.5	18
	HSP-M16	16	HSP-Rd16	16	35	22	24
	HSP-M20	20	HSP-Rd20	20	47	28	32
	HSP-M24	24	HSP-Rd24	24	54	31	36
	HSP-M30	30	HSP-Rd30	30	72	41	45
	HSP-M36	36	HSP-Rd36	36	84	47	54
	( * ) by using the lifting loop type THS or the lifting swivel THH and with use of reinforcing tail and reinforcing steel

	Type	Thread	Type	Thread	Overall	Load	Weight
	HSP-M-SS		HSP-Rd-SS		length	D	e
		M		Rd	h mm	mm	mm
Hijshuls met voetplaat HSP-SS
	HSP-M12-SS	12	HSP-Rd12-SS	12	30	16.5	18
	HSP-M16-SS	16	HSP-Rd16-SS	16	35	22	24
	HSP-M20-SS	20	HSP-Rd20-SS	20	47	28	32
	HSP-M24-SS	24	HSP-Rd24-SS	24	54	31	36
	HSP-M30-SS	30	HSP-Rd30-SS	30	72	41	45
	HSP-M36-SS	36	HSP-Rd36-SS	36	84	47	54
	( * ) by using the lifting loop type THS or the lifting swivel THH and with use of reinforcing tail and reinforcing steel

	Type	Thread	Type	Thread	Load	Overall	Bar	Load Kg	Weight
	TRL- M		TRL- Rd		Rate	length	diam.	b	a
		M		Rd	t	L mm	D mm	mm	mm
Hijsanker TRL
	TRL- M12-10	12	TRL- Rd12-10	12	0.5	200	8
	TRL- M16-12	16	TRL- Rd16-12	16	1.2	270	12
	TRL- M20-16	20	TRL- Rd20-16	20	2	350	14
	TRL- M24-20	24	TRL- Rd24-20	24	2.5	400	16
	TRL- M30-25	30	TRL- Rd30-25	30	4	500	20
	TRL- M36-28	36	TRL- Rd36-28	36	6.3	650	28
	TRL- M42-32	42	TRL- Rd42-32	42	8	850	28
	( * ) by using the lifting loop type THS or the lifting swivel THH and with use of reinforcing tail and reinforcing steel

	Type	Thread	Type	Thread	Load	Overall	Bar	Load Kg	Weight
	TGK- M		TGK -Rd		Rate	length	diam.	b	a
		M		Rd	t	mm	D mm	mm	mm
Hijsanker gebogen TGK
	TGK- M12-108	12	TGK -Rd12-108	12	0.5	108	8
	TGK- M16-167	16	TGK -Rd16-167	16	1.2	167	12
	TGK- M20-187	20	TGK -Rd20-187	20	2	187	14
	TGK- M24-240	24	TGK -Rd24-240	24	2.5	240	16
	TGK- M30-300	30	TGK -Rd30-300	30	4	300	20
	TGK- M36-380	36	TGK -Rd36-380	36	6.3	380	25
	TGK- M42-450	42	TGK -Rd42-450	42	8	450	28
	( * ) by using the lifting loop type THS or the lifting swivel THH and with use of reinforcing tail and reinforcing steel

	Type	Thread	Type	Thread	Load	Overall	Bar	Load Kg	Weight
	TGL- M		TGL- Rd		Rate	length	diam.	b	a
		M		Rd	t	mm	D mm	mm	mm
Hijsanker gebogen TGL
	TGL- M12-137	12	TGL- Rd12-137	12	0.5	137	8
	TGL- M16-216	16	TGL- Rd16-216	16	1.2	216	12
	TGL- M20-257	20	TGL- Rd20-257	20	2	257	14
	TGL- M24-360	24	TGL- Rd24-360	24	2.5	360	16
	TGL- M30-450	30	TGL- Rd30-450	30	4	450	20
	TGL- M36-570	36	TGL- Rd36-570	36	6.3	570	25
	TGL- M42-620	42	TGL- Rd42-620	42	8	620	28
	( * ) by using the lifting loop type THS or the lifting swivel THH and with use of reinforcing tail and reinforcing steel

	Type	Type	Load	Thread	Overall	Diam.	Element	Axial Load Kg	Diagonal 45o Load Kg	Transverse Load Kg	Weight
	HBS	HBS-SS	Rate		length		Thickness	Lift.loop / lift.swivel		Lif.loop / lift.swivel
	Socket, zinc plated	Socket, Stainless steel	t	Rd	L mm	D mm	d mm	B15	B25	B15	B25
Segment anker HBS
	HBS-Rd12-100	HBS-Rd12-100-SS	1	12	100	10	80	1000	1000	1000	1000
							100	1000	1000	1000	1000
	HBS-Rd14-135	HBS-Rd14-135-SS	1.5	14	135	12	80	1320	1500	1280	1500
							100	1500	1500	1480	1500
	HBS-Rd16-175	HBS-Rd16-175-SS	2.5	16	175	14	100	2150	2500	1690	2360
							120	1200	1200	1200	1200
	HBS-Rd16-200	HBS-Rd16-200-SS		16	200	14	100	2500	2500	2000	2500
							120	2500	2500	2250	2500
	HBS-Rd18-200	HBS-Rd18-200-SS	3	18	200	16	100	2450	3000	2030	2830
							120	2800	3000	2250	3000
							140	3000	3000	2490	3000
	HBS-Rd18-250	HBS-Rd18-250-SS		18	250	16	100	2700	3000	2650	3000
							120	3000	3000	2900	3000
							140	3000	3000	3000	3000
	HBS-Rd20-250	HBS-Rd20-250-SS	4	20	250	18	120	3540	4000	2900	4000
							140	3860	4000	3170	4000
	HBS-Rd20-300	HBS-Rd20-300-SS		20	300	18	120	4000	4000	4000	4000
							140	4000	4000	4000	4000
	HBS-Rd24-275	HBS-Rd24-275-SS	5	24	275	20	120	3920	5000	3530	5000
							140	4380	5000	3830	5000
							160	4730	5000	4000	5000
	HBS-Rd24-325	HBS-Rd24-325-SS		24	325	20	120	5000	5000	4420	5000
							140	5000	5000	5000	5000
							160	5000	5000	5000	5000
	HBS-Rd30-325	HBS-Rd30-325-SS	7.5	30	325	24	140	5440	7500	5170	7230
							160	5830	7500	5540	7500
							180	6230	7500	5930	7500
	HBS-Rd30-400	HBS-Rd30-400-SS		30	400	24	140	6220	7500	6220	7500
							160	7500	7500	7500	7500
							180	7500	7500	7500	7500
	HBS-Rd36-375	HBS-Rd36-375-SS	10	36	375	28	160	7070	10000	7070	10000
							180	7510	10000	7510	10000
							200	8000	10000	8000	10000
	HBS-Rd36-475	HBS-Rd36-475-SS		36	475	28	160	8610	10000	8610	10000
							180	10000	10000	10000	10000
							200	10000	10000	10000	10000
	HBS-Rd42-425	HBS-Rd42-425-SS	12.5	42	425	34	180	8730	12220	8730	12220
							200	9200	12500	9200	12500
							220	9700	12500	9700	12500
	HBS-Rd42-550	HBS-Rd42-550-SS		42	550	34	180	12500	12500	12000	12500
							200	12500	12500	12500	12500
							220	12500	12500	12500	12500
	HBS-Rd52-575	HBS-Rd52-575-SS	15	52	575	34	200	12470	15000	12470	15000
							220	13610	15000	13610	15000
							240	14170	15000	14170	15000
							260	14750	15000	14750	15000
							280	15000	15000	15000	15000

	Type	Thread	Type	Thread	Load	Axial	Dimensions	Weight
	THL-M		THL-Rd		Rate	Kg	e	h ( ca )
		M		Rd	t		mm	mm
Hijslus THL
	THL-M12	12	THL-Rd12	12	0.5	900	22	155
	THL-M16	16	THL-Rd16	16	1.2	1700	27	155
	THL-M20	20	THL-Rd20	20	2	3200	35	215
	THL-M24	24	THL-Rd24	24	2.5	3900	43	255
	THL-M30	30	THL-Rd30	30	4	5000	56	300
	THL-M36	36	THL-Rd36	36	6.3	7900	68	340
	THL-M42	42	THL-Rd42	42	8	10200	80	425
	THL-M52	52	THL-Rd52	52	12.5	17500	97	550
	Lifting under an angle > 45o is not allowed
	Possibility to deliver the loop with certificate and a metal ring mentioning an individual number, price ( * ).

	Type	Thread	Type	Thread	Load	Axial	Dimensions	Weight
	THS-M		THS-Rd		Rate	0 to 45o	D	h ( ca )
		M		Rd	t		mm	mm
Hijslus THS
	THS-M12	12	THS-Rd12	12	0.5	500	49	310
	THS-M16	16	THS-Rd16	16	1.2	1200	49	345
	THS-M20	20	THS-Rd20	20	2	2000	49	410
	THS-M24	24	THS-Rd24	24	2.5	2500	69	435
	THS-M30	30	THS-Rd30	30	4	4000	69	490
	THS-M36	36	THS-Rd36	36	6.3	6300	99	570
	THS-M42	42	THS-Rd42	42	8	8000	99	650
	THS-M52	52	THS-Rd52	52	12.5	12500	99	760
	The lifting loop THS is very well suited for tilting, raising and turning of elements.

	Type	Thread	Thread	Load		Dimensions
	THS-M			Axial	Angle 90o	b	c	g	sw	t		jioning link
		M	mm	kg	kg	mm	mm	mm	mm	mm	Kg / 1	mm	mm	mm
Schroefbare hijshaak THH
	THH-M12	12	18	1000	36	36	14	54	30	43	0.34	13	55	30
	THH-M16	16	20	2000	36	36	14	54	30	43	0.63	13	55	30
	THH-M20	20	30	4000	52	52	18	70	41	58	1.22	16	70	34
	THH-M24	24	30	6300	57	57	20	78	46	64	1.75	18	85	40
	THH-M30	30	35	10600	70	70	24	97	55	82	3.25	20	85	40
	THH-M36	36	50	15000	80	80	27	111	65	91	5.68	22	115	50
	THH-M42	42	60	18000	104	104	32	134	80	109	8.67	28	140	65

	Type	Overall	Diam.	Load Kg	Dimensions mm	Test results	Place of	Weight
	TIL	length	Wire	concrete	f	e	of the loop	fracture
		mm	mm	> 15 N/mm3	mm	mm	KN (* )	( test temp. : RT )
Hijsstrop
	TIL- 008	210	6	800	60	150	37.5	pulled out of connector
	TIL- 012	225	7	1200	65	160	37.1	cable
	TIL- 016	235	8	1600	70	165	31.9	pulled out of connector
	TIL- 020	275	9	2000	75	200	31.9	pulled out of connector
	TIL- 025	315	10	2500	85	230	88.8	cable
	TIL- 040	340	12	4000	100	240	128.1	cable
	TIL- 052	360	14	5200	100	260	not tested	not tested
	TIL- 063	390	16	6300	110	280	not tested	not tested
	TIL- 080	440	18	8000	120	320	not tested	not tested
	TIL- 100	525	20	10000	135	390	251	cable
	TIL- 125	570	22	12500	150	420	not tested	not tested
	TIL- 160	615	26	16000	165	450	381.4	pulled out of connector
	TIL- 200	730	28	20000	180	550	466.2	pulled out of connector
	TIL- 250	800	32	25000	200	600	487.5	pulled out of connector
	For differentation of the variouse sizea, the TIL cast in lifting loops have taps which show admissable load capacities in Kg.
	(* ) The cast-in loop was placed in the tensile test machine and tested till fracture .

	Type	Thread	Thread	Weight	Stock
	SN	A	B	H	Kg / 100
				mm
Dubbel metrische plug, SN
	SN-M12-6	M 12	M 6	16	0.54
	SN-M16-8	M 16	M 8	16	1.32
	SN-M20-8	M 20	M 8	16	2.35
	SN-M24-10	M 24	M 10	16	3.72
	SN-M30-10	M 30	M 10	16	6.37
	SN-M36-10	M 36	M 10	16	7.75
	SN-M42-10	M 42	M 10	16	12.94
	No bigger holes in the formwork than stricktly necessary!

	Type	Thread	Overall	Diam.
	AP	M and Rd	d2	D
			mm	mm
Herbruikbare afdekplug (zonder schroefdraad) AP
	AP-12	12	11	17
	AP-16	16	15	23
	AP-20	20	19	29
	AP-24	24	23	33
	AP-30	30	29	38
	AP-42	42	40	50
	The plug prevent the entry of dirt- and concrete water.

	Type	Thread	Hole diam.	Weight	Quantity
	TBP		d	kg / 100	box
		M or Rd	mm
Terwa Breek Pen
	TBP-M6	6	11	0.54	1000
	TBP-M8	8	11	1.32	1000
	TBP-M10	10	11	2.35	1000
	TBP-M12	12	11	3.72	1000
	TBP-M16	16	17	6.37	1000
	TBP-M20	20	17	7.75	1000
	TBP-M24	24	17	12.94	1000

	Type	Dimensions		Weight	Quantity
	TFB		h	kg / 100	box
		mm	mm
Schroefblok TFB
	TFB-1437	14 x 37	30		500
	TFB-1843	18 x 43	37		500

	TYPE	Load	Thread	Diam. X thickness	Colour
	KU-02	Rate t.	M	mm

Spijkerflens 2mm
	KU-02- 10		10	50 x 2 mm	white
	KU-02- 12	5,00	12	50 x 2 mm	black
	KU-02- 16	12,00	16	50 x 2 mm	green
	KU-02- 20	2,00	20	50 x 2 mm	red
	KU-02- 24		24	50 x 2 mm	yellow

	TYPE	Load	Thread	Diam. X thickness	Colour
	KU-10	Rate t.	M	mm

Spijkerflens 10mm
	KU-10-08		8	60 / 50 x 10
	KU-10-12-LR	5,00	12	60 / 50 x 10	red
	KU-10-12		14	60 / 50 x 10
	KU-10-16-LR	12,00	16	60 / 50 x 10	green
	KU-10-16		16	50 / 40 x 10
	KU-10-18		18	60 / 50 x 10
	KU-10-20-LR	2,00	20	60 / 50 x 10	blue
	KU-10-20		20	50 / 40 x 10
	KU-10-22		22	80 / 70 x 10
	KU-10-24-LR	25,00	24	80 / 70 x 10	blue
	KU-10-24		24	50 / 40 x 10
	KU-10-27		27	80 / 70 x 10
	KU-10-30-LR	4,00	30	80 / 70 x 10	black
	KU-10-30		30	50 / 40 x 10
	KU-10-33		33	80 / 70 x 10
	KU-10-36-LR	63,00	36	110 / 100 x 10	blue
	KU-10-42-LR	8,00	42	110 / 100 x 10	green
	KU-10-42		42	80 / 70 x 10
	KU-10-48-LR	125,00	48	110 / 100 x 10	whith

Menu

1D montage- en hijssystemen